Yonico 14993q - V Groove Router Bit, Angle: 60 Deg, Diameter: 1/2" - 1/4" Shank

Product Information

CMT part no:715.095.11 These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Note: Whiteside v-groove router bits with brazed carbide cutting tips (tc tipped) have a point flatness of 0.25mm (0.01"). The V-groove router bit consists of a cutting edge in the shape of a V, with two angled blades that create the sides of the groove. The depth of the groove can be adjusted by changing the height of the router bit in the router.

Router Bits 丨 KONETOOL Grooving Router Bits 丨 KONETOOL

Upcut spiral router bits plunge easily and produce smoother, cleaner cuts than straight router bits.Our three-wing slot cutter router bits allow you to cut a range of grooves, rebates or biscuit slots.

Trend Rout Cutters - Trend Direct UK Trend Rout Cutters - Trend Direct UK

V-bits as with most other decorative cutting bits come in a range of different shapes and angles that can be used to form everything from a deep thin channel to a wide shallow one. The v-groove bit is very similar to the core cutting bit above but rather than leaving a rounded shape, the v-bit cuts a “V” shaped channel that runs down to a point.CMT part no:915.660.11 These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Give any surface a special touch with a delicate cove or an eye-catching vein with our roundnose router bits.

V-Groove Bits - Bosch Power Tools | Boschtools Carbide-Tipped V-Groove Bits - Bosch Power Tools | Boschtools

If you are fairly keen on carpentry and joinery, the router is one of the best power tools you can have in your tools arsenal as it can be used for a huge variety of jobs from cutting hinge recesses, mitering worktops, trimming and shaping edges to cutting a whole variety of timber joints. Carbide bits are tougher than standard HSS bits so on the whole will last much longer and keep their sharpness for considerably longer, however they are brittle and can easily damage if dropped you need to take care of them! More often than not, these are generally shaping or moulding bits that are used to create specialist moulding’s and shapes, sometimes two in a single pass. CMT part no:915.127.11 These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Downcut spiral router bits can be used for cutting grooves, dadoes and inlays leaving a clean top surface with minimal tearout.On its own, the router is useless, but coupled with the correct bit you can create a masterpiece! To these ends here is a run down of the most popular router bits and different shapes or mouldings they cut. Straight Cut Router Bits These flush and v-groove router bits trim face frames flush with cabinet sides and cut a decorative v-shaped groove to help hide the joint.

Router Bits UK | 120 degree included angle v-groove router bit

The depth of the cut is determined by the size of bearing fixed to the base of the bit and due to this, rabbet bits normally come with a selection of different sized bearings so that you can cut a range of different depth joints. The purpose of the bearing is to allow you to easily guide your router bit along a piece of work so that your (normally) shaping or detailing work is kept straight and accurate.Unlike horizontal raised panel router bits, plunge raised panel router bits do not have bearings, so they can plunge directly into panels to form decorative profiles. Not only is it used for cutting channels it can also be used for creating decorative effects in wooden panels such as doors, table edges and other similar objects. Rabbet cutting router bit and rabbet or shoulder joint cut – Image courtesy of mullerconstructionsupply.com Edge Cutting Router Bits