HB Body 222 Bumpersoft Car Body Filler Black Putty For Plastic Bumpers 250g With Hardener Excellent Adhesion Easy To Sand With P120-P240

Product Information

Uncured resins are classed as dangerous goods and would need to be disposed of correctly. For domestic users, usually your local council recycling centre will have a disposal service for such chemicals or containers. To finish the repair and prepare for the primer, the use of a Plastic Filler Product is recommended. Rigid PVC strips are manufactured from a different material to our flexible plastic strips and we encourage you to request samples if you are unsure which material to choose.

Using a 3M™ Cubitron™ II Clean Sanding Abrasive Disc 180+, sand the area to shape, ready for either an application of plastic filler or prepare directly for primer application. Use either 3M™ Flexible Plastic Filler for plastic-like performance and excellent sanding and feather-edging, or use 3M™ Plastic Filler.

Epoxy is sensitive to low temperatures so we would not attempt to try and cure the resin at very low temperatures such as below 15 °:C. At those temperatures, the cure time will be lengthened considerably.

We have not specifically saught FDA (or similar) approval for this resin system so if you were to make these plates commercially then you would either need to make a plate using this resin system and then have it tested and approved safe for food use or use a different resin system that has specifically been approved for food use. Mixed and cured fully and properly the resulting plastic should be stable and non-toxic but testing would be required to prove this. Our plastic flat strips are manufactured in PVC and are solid all the way through, both in terms of material and colour. We get asked sometimes if our flat strips are foiled, with the colour just being on the surface of the product. They are not foiled, they are high quality products and are a solid colour all the way through. Bendable plastic strips Clean the damaged area with a soft cloth (i.e. 3M™ Professional Panel Wipe and a suitable degreaser). What is the best way to ensure that a plastic bumper tab, which was rebuilt with 3M™ Super Fast Repair Adhesive, will reliably adhere to a bumper surface?

How to use a bumper repair kit

Prepare adhesive and activator (if applicable). Open the adhesive and, if relevant, the activator according to the manufacturer’s instructions. Stay safe. Work in a well-ventilated, protected area. Wash your hands when you are finished, and optionally wear gloves for extra protection. Clean the surface area using 3M™ Professional Panel Wipe and degrease in accordance with paint company recommendations. Epoxy resins have very little odour and so it's quite viable to use them indoors (i.e. in your house) without upsetting anyone. The resin is almost completely odourless and the hardener has an amonia smell which doesn't really carry or linger.