276°
Posted 20 hours ago

Rust-Oleum AE0040028E8 400ml Surface Primer White

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Temperature of air and substrate between 10 and 35°C and relative humidity below 70%. The substrate temperature must be at least 5°C above dew point. To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. Stir individual components thoroughly before mixing them together. Use the boxing method or a low speed mixer. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application.

Preparation: Remove oil, grease, and all other surface contamination by cleaning with appropriate detergents. Remove loose rust by scraping and wire brushing or sanding. Lightly abrade UPVC, remove any dust and wipe with methylated spirit. Application: Stir thoroughly before use. Thinning is not required. Apply 1-2 coats with a brush or short pile mohair roller. For roller application lay off immediately with a brush. For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. Application Brush, Roller, Spray Dry to Handle (at 20°C) 8 Hours Dry to Recoat (at 20°C) 16 hours (20°C)

Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. Rust-Oleum 3333 Super Adhesive Primer Resists light to moderate abrasion, intermittent high humidity and moisture, regular chemical cleaning and spillage of chemicals if recoated with the appropriate Rust-Oleum system. 3333 Super Adhesive Primer can be recoated with nearly all Rust-Oleum Epoxy, Polyurethane, Chlorinated Rubber/Vinyl and Acrylic coatings. It is also classified Class 1 Surface Spread of Flame according BS 476; part 7: 1987. Data sheet Manufacturer Rust-Oleum For Use By Consumer Use Interior / Exterior Use Interior Use For Use On Floors Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar.

Limitations: Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colourRemove grease, oil and all other surface contaminations with Rust-Oleum FK111 Cleaning Solution or by alkaline or high pressure (steam) cleaning. New concrete should cure and dry for at least 30 days prior to the application of the coatings. The surface must be clean and may be slightly damp during application. Clean Up: Remove as much paint from brushes as possible before cleaning. Clean with a suitable brush cleaner or soak in white spirit for 5-10 minutes, rinse and dry thoroughly. Data sheet Manufacturer Rust-Oleum For Use By Professional Use Interior / Exterior Use Interior & Exterior For Use On Steel Application Method Brush

Drying Time: Touch dry in 4 hours. Handle after 8 hours. Apply a second coat after 16 hours (if necessary). Full hardness is achieved after 7 days. Ensure application conditions are favourable for painting, we recommend that the temperature is between 10⁰C - 32⁰C with a maximum humidity of 80%, do not apply in direct sunlight or if conditions are humid. Coverage for Metallic Finish: Up to 2m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface. Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point. Coverage for Matt/Satin/Gloss Finishes: Up to 10m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment