276°
Posted 20 hours ago

Parrot MKi9200 Hands-Free Car Kit

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Do not bother with version 2.00 firmware as it had bad echo problems on handsfree – these should be updated to V2.11 or V2.20. On turning the ignition off the Screen illuminates perfectly stating 'Parrot MKi9200 Goodbye' etc so it doesn't appear to be completely dead.

What you can try Ole, is disconnect the unit for 1 hour - and then reconnect... Sometimes doing this, re booting the unit, will cure it - but if that works and it then goes wrong again, or it doesn't work for you, then Im afraid the unit is faulty. Some early versions of the MKi9200 will require an interim update to V1.96 to be performed first, so you will need this file and also V2.11 or V2.20. If your software version is V1.95 or less you MUST update to V1.96 first. From version 2.00 software the MKi series support “multipoint”– this allows the connection of 2 phones at the same time and is enabled in the Bluetooth settings. The thing is i cant fookin find the buttons as it was dark by the time i got home form work. So i still dont know if i can fix it. The newer versions have compatibility / bug fixes and have a much shorter boot sequence ( turn on time). Update preparationI put an SD Card in it today and it booted up normal although it says 'no audio file found' and then it proceeds to stay on the normal 'Parrot MKi9200' screen - which is further along than it was previously. The really early versions of MKi9200 firmware were quite buggy and the boot up time was very long. Also, updates were made as new phones were launched. Displej lze při opouštění vozidla odejmout pro větší bezpečnost před krádeží. Displej Mki9200 umožňuje práci a výběr z telefonního adresáře, zobrazení čísla a jména volaného/volajícího, zobrazení menu sady a zobrazuje stav při přehrávání hudby, playlist, jméno skladby. Může též zobrazit obrázek obalu CD. Kombinací dvojitého mikrofonu a nového SW je zaručen vysoce kvalitní přenos zvuku, nulové echo a potlačení okolního ruchu při uskutečněném hovoru. MKi9200 je dodávána se speciálním audio kabelem, který slouží k připojení libovolného druhu analogového nebo digitálního přehrávače. Tento kabel se rozděluje do 3 koncovek: Many computer problems are caused by missing or outdated device drivers, especially in Windows 11. If your desktop or laptop is running slow, or keeps crashing or hanging, there is a good chance that updating your drivers will fix the problem.

Dálkové ovládání umožňuje přístup k hlavním funkcím – PŘEHRÁT/PAUZA, NÁSLEDUJÍCÍ SKLADBA a HLASITOST. MKi9200 zobrazuje playlist s informacemi o přehrávané skladbě. Sada MKi9200 má vestavěný digitální zesilovač.The Parrot MKi9200 Bluetooth Car Kit automatically synchronises the names and phone numbers in your mobile with its phonebook and updates its phonebook each time a new entry is detected. To access your phonebook and make a call simply press the green button to start the user-independent voice recognition: the Parrot MKi9200 recognises your voice and the name you are saying without any prior teaching process. You can also directly access the phonebook and browse all the names thanks to the voice synthesis (Text To Speech). So simple! When you receive a call the name and the number are displayed on the screen. To follow on your conversation in a discreet mode switch the communication instantaneously towards your Bluetooth headset or your mobile phone. After you enter the update process it is vital that it is not interrupted – you MUST wait for the unit to re-boot itself after the screen goes blank. If the unit does not re-boot after a minimum of 5 minutes, something has gone wrong. Unfortunately, your choices at this stage are rather limited. Díky přípravě pro integraci do vozidla je pak tel. hovor slyšitelný ze 2 repro automobilu a hudba z min. 4 repro. (závisí na typu vozidla) So I'm a bit stumped as to the problem and would be happy for any suggestions or to hand the car in to someone who's more familiar with these to work with.

Different software versions of Parrot MKi9200’s may operate slightly differently. If you have a Version 2 control box you can update this to the latest version for that version – V2.20 As I understand, in phone mode only the front two speakers are used, and all speakers are used in music mode. I went to Halfords today to buy the unit and whilst speaking to the engineer, he was convinced that the music would only play through the front two speakers as well - something to do with the cable going to the amplifier? After the picture appeared and disappeared the coloured bars that usually appear bright and 'moving' instead showed up very faint and there appeared to be no life beyond that. Installation sounded pretty simple, it pretty much plugs and plays into the parrot bluebox and then you take the Can High and low cables and put them to pins 9 and 10. Apparently they are colour matched anyway so no problems figuring out which way round! Thank you for your reply... I apologise for the delay in my reply to you - your reply came in the early hours ;)

Enquiry about Parrot MKI 9200

Would recommend that you leave it to try to complete the update for a further 10 mins. After this period you can only try the following: The MKi9200 will now re-boot. Please note that sometimes it will refuse to erase memory. Simply turn off the MKi9200 and try again. Of course yours should have lasted longer than it has, but as you will know, these things do happen sadly - It is then now a case of deciding which way you want to progress with it - but I would definitely suggest trying the "re boot" as above first - and then go from there as above.. Let me know how you get on -

We have come across this before- they should not have told you it needed the "update" at all, the unit you have is technically faulty Im afraid. ( As you said, it cant be done without the remote anyway ) Podporované profily - HFP (Hands Free Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio Video Remote Control Profile), OPP (Object Push Profile), PBAP (Phone Book Access Profile) you also use the source button to answer a call but to end the call you need to hold it down. Pressing the source button whilst in a call will simply put the phone into discreet mode and double tapping it will remove it from discreet mode. When I plug the current screen into a PC I get the normal picture of a white outline of a computer showing up on the screen and it is recognised as a device by my computer where I can view files on the memory SD Card etc - again I'm hoping this is a sign of life?

Currently popular on idealo

I installed a new LCD Lead and Screen - upon turning on the ignition a brief picture appeared similar to a red circle with a line through it, I had previously read this could be it updating but after waiting for 20mins+ I thought this was a bit too long as most people said 5 minutes was enough. But now that you have done that , got a new remote etc - you have proved that the unit has gone faulty. In fareness it copes with all the other stuff fine but when your scrolling through lists your still going to need the other remote which in some respects makes it a bit pointless (tho it is nice being able to do basic actions from the steering wheel) On the MKi9200 go into Settings / Advanced / Restore Factory Settings and confirm the reset with the Green key on the remote. The MKi9200 will erase memory and re-boot. After re-boot set the required language by pressing the centre button on the Parrot remote. The unit will then re-start once more. Update Procedure

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment