Lithofin POW05 MN Power-Clean 500ml

Product Information

Keep your stone clean with Lithofin MN Power-Clean. This high-quality cleaner is ideal for occasional deep cleaning right through to removing stubborn dirt. For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use. For thoroughly cleaning used or exceptionally dirty surfaces Initial cleaning of newly laid surfaces. If the result is not satisfactory, repeat the process allowing the Lithofin MN Power-Clean to work longer and brush more vigorously. Externally it is suitable for use on an extensive range of natural and engineered stone patios and flagstones prior to jet washing. WHERE IT CAN BE USED

Lithofin MN Power Clean is a special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). It is free of solvents, low in odour and economical in use. The Lithofin Power Clean is a specially made product for cleaning all natural stones including polished marble and limestone. It is excellent for cleaning slate, honed limestone, sandstones like Yorkstone and polished or honed granite. It can be used indoors and outdoors. It is a part of the very popular LITHOFIN-Range of cleaning products most of which are eco-friendly. The surfactants of Power Clean are Bio-degradable in accordance with EU-regulations. The container is made of environmentally friendly polyethylene and clean empty containers can be recycled through local collection services. Power Clean is supplied in 500ml and 1Ltr containers and is yellowish in colour. Both of the 500ml and 1Ltr bottles have child proof caps. It is mildly alkaline with a ph-Value of approximately 10 and is completely water soluble. Power Clean has a nonspecific light pleasant odour. Contractors can also buy this product in 5Ltr containers. Lithofin MN Power-Clean is ideal for cleaning marble, natural and engineered stone. Lithofin MN Power-Clean is a product low in solvents, low in odour, and economical in use. It is a mild alkaline cleaner, which contains a balanced mixture of cleaning components that guarantee optimal performance. Cleaning and maintaining your stone surfaces shouldn’t be hard, though it can be labor-intensive. Thankfully, Stone Doctor Australia has paved the way to include Lithofin MN Power-Clean in your cleaning habit to give your floors a deep periodic clean as and when required and its frequency is totally depending on what the stone surfaces. This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.Suitable for use on polished, finely honed, and rough marble and all types of other natural stones. Lithofin MN Power Clean is for thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble. Lithofin MN Power Clean is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance. It is nearly odourless and highly economic. Lithofin Power Clean is best used for a one off clean when preparing a floor or other surfaces before applying anyone of several types of finishes. It is recommended that you thoroughly clean all natural stone surfaces before applying an impregnator, a seal or polish to natural stone. Power Clean is a good choice for such occasions. This product is also recommended for use as a stripper in to remove old finishes or in a more diluted form as an annual cleaner. It is not meant for use as a daily cleaner, when used on bathroom vanity tops and kitchen worktops it should be diluted to 1-part power clean to 10 parts water.

Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wallpaper, etc. Always test the Lithofin MN Power-Clean in an inconspicuous area prior to use.Power Clean is formulated for the removal ingrained dirt from heavily soiled floors, it is very good for cleaning newly laid floors and helps to remove cement, adhesive and grout residues. It will also remove several types of stain from all stone surfaces. These types of stains include oil, grease, tea and coffee. Power Clean can also remove recent wine stains and emulsion paint from floors etc. On older floors, polish residues, the buildup of care products, acrylic emulsion and much more can be effectively removed with the use of Lithofin Power Clean.

Externally it can be used on all natural stone surfaces including patios, walls and garden furniture etc. Stone paving slabs and drive ways can also be cleaned with Lithofin Power Clean. This is not a type of product that should be left to dry on any surface, always rinse the area off with clean water. If you use hot water to rinse off the product the area should be dry and ready for use in about half an hour. CONTINUED USE GUIDELINES Allow the Lithofin MN Power-Clean to work for 10 to 20 minutes; brush occasionally. Do not allow it to dry by adding water if necessary. Power Clean should not be used to clean Metal, Wood and any painted or varnished surfaces and should be kept away from wall paper. If any of these materials are close to or adjacent to your working area, they should always be protected first before using this product. This product is not suitable for use on leather, all types of fabric, carpets or laminate flooring and all these materials should be protected from splashes of this product. Please note that the above charges are subject to a 65p surcharge for all deliverieswithin the London Congestion Charge area (EC1, EC2, EC3, EC4, N1, NW1 2, NW1 3, NW1 5, SE1, SE11, SW1, SW11, W1, W2 2, WC1 and WC2)In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Please note that the courier we use offera next working day service as standard but this is not guaranteed.For an additional charge the following deliveryservices may also be available - Saturday Morning, Next Working Day Before 12 Noon, Next Working Day Before 9am (* Please telephone us on 01962 732325 to discuss.) Apply and evenly distribute Lithofin MN Power Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously. Please

Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. We highly recommend trying the product in an inconspicuous area prior to use. The only key to keeping your floors clean and free of dirt, residue, and stains is regular and efficient cleaning. Simply use Lithofin MN Power-Clean can be enough. If you’re unsure how Lithofin MN Power-Clean is used, chat with our team experts now! We are pleased to assist you. Apply and evenly distribute Lithofin MN Power-Clean as supplied or diluted up to 1:5 depending on the nature of the dirt. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat allowing the product to work longer and brushing more vigorously. To strip off and old seal, wax polish or any other type of finish, it is best to work in small areas of 1 or 2 sqm areas at a time. Mix the product 1:1 and apply liberally but do not allow it to dry on the surface. Agitate the area with a stiff brush or broom and then remove it with either a mop or a floor squeegee. Once you have removed the product rinse the area with clean water, if the floor is not as clean as you want repeat the process before moving on to the next section.Lithofin MN Power-Clean is formulated for the removal of ingrained dirt from heavily soiled floors, it is very good for cleaning newly laid floors and helps to remove cement, adhesive, and grout residues on smooth polished surfaces. Lithofin MN Power-Clean will also remove several types of light staining. On older floors, polish residues, the buildup of care products, acrylic emulsion, and much more can be effectively removed with the use of Lithofin MN Power-Clean. Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on granite, gneiss, and similar acid-resistant stones, use Lithofin MN Builders-Clean. Lithofin Power Clean is suitable for cleaning all types of natural stone surfaces. These include floors, walls, stairs kitchen worktops. It is suitable for use on all bathroom surfaces made of natural stone. These surfaces include polished marble, honed marble, rough marble, all the types of granite finishes, polished or honed travertine and slate. Power Clean can also be used for cleaning stone fireplace surrounds and hearths. THIS CARRERA MARBLE FIREPLACE WAS CLEANED USING POWER CLEAN AND A STEAM CLEANER Lithofin MN Power Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.