Wallrock Dampstop Thermic Roll

Product Information

All home insurance policies vary, but usually they do not include damp or mould treatment. This is because it is seen as general ‘wear and tear’ that can occur in a property and therefore not an unexpected issue which can be covered with insurance. More severe damp can cause damage to the structure of the building and lead to rotting timbers or wooden features. It can also affect your health - exacerbating existing conditions. The most common causes of damp are condensation and penetrating damp, with rising damp being a rarer form of damp. What does damp look like on walls? Open and clean storage areas that don’t receive sunlight, such as cupboards, wardrobes and drawers, to help ventilate and prevent damp.

Touch: Touching your walls to determine if they’re excessively cold or wet can also help you identify dampness. Avoid drying laundry on radiators. Hang washing to dry outside or or in the bathroom with the door closed, window open and extractor fan on. Prevent moisture from getting in: Penetrating damp can occur for a number of reasons, but speedy roof repairs, good gutter and drain maintenance, repointing failed mortar and sensitive render repairs are also key to keeping it out. When you buy a new home insurance policy you will need to agree to a list of assumptions about the property including that it is in a good condition. You will need to declare damp when you buy the policy as, if you have damp, this means the property is not in a good condition. What should I do if damp shows up on a house survey?The best way to get rid of damp is to prevent it to begin with and the ideal way to stop it is to keep your home consistently well ventilated," says Ruth MacEachern. "The best ventilation is a fully fitted, intelligently-designed system. By fitting a whole house ventilation system and correctly ventilating your home, condensation dampness will disappear and your damp areas will dry out." Thankfully, our qualified members are here to assist you no matter the extent of your damp problem. Just use our free search feature to connect with a range of trusted experts today. How much does professional damp proofing cost?

Occasionally, penetrating damp can be caused by problems with cavity walls. Walls in modern homes (and many built since 1920) are usually constructed as two layers of wall with a cavity between them, so that moisture penetrating from outside can evaporate before it gets to the inner wall. In newer houses, there will be a damp-proof course (typically built into a wall at 15cm above ground level) and a damp proof membrane under the floor to prevent water from moving upwards. The two are connected to provide a seal to any water coming into the house. However, many older properties were built without one or either of these forms of protection. Prevention is always better than the cure. There are several things you can do to prevent damp from appearing in your home such as: Gaps in (or damage to) window frames and doors can lead to penetrating damp. Make sure your property is airtight and get damage fixed promptly if it occurs. 3. Burst gutters and pipes

How do I Stop Rising Damp?

Good ventilation and regulated heating are the most effective ways of stopping condensation. You may consider a combination of the following to stop condensation: The treatment of any damp depends on what is causing the issue. This may not be straightforward as there can be multiple causes. It may be possible that you can treat the damp yourself, but if the problem is serious, you may need to pay for a damp specialist. Fixing condensation issues

Under the Consumer Rights Act, a service should be provided using ‘reasonable care and skill’. If your new damp-proof course work was unnecessary, the company that installed it has failed to use reasonable care and skill and is therefore in breach of contract. To make a claim, you will need to prove this is the case. This is usually done by asking an independent expert agreed upon by you and the company to assess whether the work was necessary. A tide mark on your wall – this line of white salts is formed by the evaporation of the ground water

Penetrating damp is normally the result of external defects on the home that allows water to enter the building fabric. Typical property or building external defects that may lead to rainwater penetration include: If you are concerned about developing a damp problem, there are some steps you can take to prevent mould and damp. These can involve behavioural changes as well as some preventative products. We cover all of these in the following sections. What Is Condensation? Rising damp is when ground water moves up through a wall. Most walls allow some water in, but it’s usually stopped from causing damage by a barrier called a damp-proof course. This is usually a horizontal plastic or slate strip in the wall. When cooking, use the minimum amount of water needed, cook with pan lids on and turn the heat down once the water has boiled. Dampness in walls can be a big problem for homeowners in the UK. The English Housing Survey reported that as many as 904,000 homes in England had problems with damp in 2021. Depending on the type and cause of the damp, it can lead to structural issues and can also impact your health. For this reason, it should be dealt with as soon as possible. Our guide outlines everything you need to know about identifying and treating dampness in walls. What is dampness?