TP-Link AX1800 Wireless Dual Band Ceiling Mount Access Point, Wi-Fi 6 , Gbps Ethernet port support 802.3at PoE+, Ultra-High Performing Enterprise Wireless for High-Density Environments(EAP620 HD)

Product Information

You may come across this model as the EAP620 HD, although somewhere AX1800 is added to the name, an acronym for 802.11ax support up to 1.75 Gbps. In both cases, it is the same access point, but the Omada inscription does not indicate the name of the model or series, but the support of management via the cloud. That is, to monitor or configure a large fleet of WLAN devices, you do not need to buy a WLAN controller, especially if you do not plan to overload your network with numerous QoS rules or anti-flood protection. What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 87420 Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Note thatEAP620 HD v1.0 doesn't support Omada Cloud-Based Controller.Please go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller. Voor Seamless Roaming moeten de clients 802.11k/v ondersteunen en zijn er mogelijk extra instellingen vereist. De prestaties kunnen variëren op basis van het clientapparaat.

If earlier you turned to TP-Link products in cases of austerity, now the company is entering the Feature-rich product area through the Omada SDN platform. This is a convenient solution both for owners of facilities where a WLAN network is installed, and for outsource companies serving the installation remotely. Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-2022 55814 Centralized Management: Cloud access and Omada app for ultra convenience and easy management of multiple devices from a single interface. Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. △PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations. IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process Ultra-Fast WiFi 6 Speeds:Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. † The Omada EAP620 HD model of the AX1800 class characterizes the mainstream of the Wi-Fi 6 standard for those clients who care not about the bandwidth of the interface, but the connection of clients using a new technology in a busy radio environment using OFMDA, 1024-QAM, BSS Coloring, Beamforming, Band Steering, Seamless Roaming and Cloud Management. This AP has 4 spatial streams, allowing for an aggregate data rate of 2.4 and 5 GHz in the region of 1775 Mbps. Design and key characteristics of the access point

The EAP620 HD is designed for both ceiling and wall installation using a lightweight snap-on mount. All Wi-Fi devices have an increased appetite for electricity, and this model is no exception. The power consumption of TP-Link EA P620 HD is 12-13 W, so for PoE connection you need a switch or injector with 802.3at (PoE +) support. But now there are no problems with this - almost any PoE switch released over the past 3 years has support for "one plus", that is PoE +, but for uniformity of management and service, it is better to consider the TP-Link Omada series switches. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To UpgradeThis firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above. During testing, I noticed that in the 5 GHz band, the access point chooses a frequency in the 5.2 GHz band, reluctantly climbing higher. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) through Omada Cloud Based Controller, Centralized Cloud Management, and Intelligent Monitoring. Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. △ The power consumption of the access point in idle mode is 5 W, which by the standards of corporate Wi-Fi 6 devices is less than the minimum, but still 2 times more than the previous generation APs consumed.