Oase FiltoClear 6000 Filter Set

Product Information

New pull-out mechanism that allows filter sponges to be conveniently cleaned without having to get dirty or disassemble the whole filter

These Oase Filtoclear Pond Filters are a highly developed range of pressure filters designed with ease of use and quality filtration in mind. The Filtoclear pressure filter also has been designed with all the connections and major operating elements in the lid allowing the filter to be partly buried out of sight If a product fails during the first 6 months, Aquatix-2u Ltd will cover the return costs. After 6 months the cost of returning the product will lie with the customer, as per the Consumer Rights Act 2015.The Oase Filtoclear 20000 Pond Filter is a highly developed pressure filter designed with ease of use and quality filtration in mind. Large pallet items like aquariums are deemed delivered successfully with no damage once the the driver has left the property. If a report of damage is submitted after the driver has left we may be unable to assist with replacements. We recommend refusing a damaged delivery, this is the fastest resolution.

Three filter foams (instead of the two previously) for even more thorough cleaning – from FiltoClear 13000 onwards Damaged on arrival? Should any damage be identified upon or before opening the parcel(s) you should notify us within 24 hours of delivery and advise the exact damage.Changing the foams within the Oase Filtoclear is really simple. Once you have removed the clip from the unit itself use the cleaning handle to pull the foams and the lid away from the body. You will see the bottom plate has two screws as shown below, these both need to be removed and are Philips head fittings. Once the screws are removed, the bottom plate will slide off, this will allow you to slide the foams out, you will then be able to give the unit a good rinse with a hose pipe and clean the upstand as shown in the first picture. Once you are happy all the debris has been removed, fit your new foams and your filter will be ready for use. The foams will need replacing approximately every 2 years, you will be able to tell when they need to be replaced as they will have become misshaped and will no longer fit flush with the body of your Oase Filtoclear.

Please be aware, it is possible we may deliver the Goods in advance of any estimated delivery date.In the below pictures you can see the three symbols that appear on the Filtoclear. The first picture is the sludge drain, this is where the water comes out when you're cleaning your Filtoclear. The second picture shows fish, this outlet goes to your pond, and the final picture shows a pump and this is where you put the hose from your pump to. Any personalised items or items made to your specification cannot be returned, e.g. off the roll pond liners, cut to length pond hose. For your own protection, we recommend that goods that are to be returned, are sent via a recorded delivery service with sufficient insurance to cover the cost of the goods. Features a valve that allows cleaning without taking it apart, a clever handle on top allows you to compress the foam layers to remove sludge from the filter Incorrect Deliveries, including wrong items and shortages should be notified to us within 24 hours of delivery to advise the exact inconsistencies.